TP860 User's Manual
- 67 -
ESC
-
Turn underline mode on/off
Format: ASCII: ESC
- n
Decimal: 27
45 n
Hex:
1B 2D n
Description:
n=0, 48 Turn underline mode off.
n=1, 49 single underline mode on
n=2, 50 double underline mode on
ESC 2
Set the line spacing to 3.75mm
Format:
ASCII: ESC 2
Decimal: 27 50
Hex:
1B 32
Description:
Set the line spacing to 3.75mm.
ESC 3
Set the user-defined line spacing
Format:
ASCII:
ESC 3 n
Decimal: 27 51 n
Hex: 1B 33 n
Description:
Set the line spacing to n dot lines, n=0~255.
The line spacing of TP860 printer is the n* horizontal minimal unit.
The horizontal or vertical minimal unit is specified by GS P Command.
ESC =
Enable/disable peripheral device
Format: ASCII:
ESC = n
Decimal: 27 61 n
Hex: 1B 3D n
Description:
The Last bit of n is 0, disable printer peripheral device.
The Last bit of n is 1, enable printer peripheral device.
ESC ?
Cancel user-defined character
Format: ASCII:
ESC ? n
Decimal: 27 63 n
Hex:
1B 3F n
Description:
Cancel the user-defined character specified by n. n=32~126.
ESC @
Initialize the printer
Format: ASCII: ESC @
Decimal: 27 64
Hex:
1B 40
Description:
Initialize the printer to the state when the printer was turned on.
Summary of Contents for TP860 Series
Page 1: ...User s Manual TP860 Series Printer...
Page 31: ...TP860 User s Manual 25 Figure 13...
Page 109: ......
