Jolimark TP860 Series, User Manual

Page: 72 / 109

TP860 User's Manual
- 66 -
minimal unit). nL, nH=0~255.
Horizontal or vertical minimal unit is specified by GS P command.
ESC % Select/cancel user-defined characters set
Format: ASCII: ESC % n
Decimal: 27 37 n
Hex: 1B 25 n
Description:
n=1, Select the user-defined characters set; n=0, Select inner characters set
Default: n=0
ESC & Define user-defined characters
Format: ASCII: ESC & y c1 c2 [x1 d1..d(y*x1)] [xk d1..d(y*xk)]
Decimal: 27 38 y c1 c2 [x1 d1..d(y*x1)] [xk d1..d(y*xk)]
Hex: 1B 26 y c1 c2 [x1 d1..d(y*x1)] [xk d1..d(y*xk)]
Description:
Define the user-defined Characters from c1 to c2.
y=3; 32
≤ c1 ≤ c2 ≤ 126;
0 ≤ x ≤ 12; [Character A 12*24], 0 ≤ x ≤ 9; [Character B 8*16];
d=0~255; k=c2-c1+1;
y specifies the number of bytes in the vertical direction, x specifies the number of dots in the horizontal
direction, d specifies the user-defined character.
ESC * Select bit-image mode
Format: ASCII: ESC * m n1 n2 d1..dk
Decimal: 27 42 m n1 n2 d1..dk
Hex: 1B 2A m n1 n2 d1..dk
Description:
Set the image mode (with m); the number of dots (with n1 and n2); the image data (d1…dk)
m=0, 1, 32, 33; n1=0~255; n2=0~3; d=0~255.
k=n1+256×n2 (m=0, 1)
k=(n1+256×n2)×3 (m=32, 33)
The number of dots in horizontal direction is n1+256×n2.
If the number of dots exceeds one line, the part which exceeds the maximum number of dots (shown as
below) is ignored. M is used to select the dot image mode.
Vertical Horizontal
M Mode Number
of dots
Dot
density
Dot
density
Number of dots
(Max)
0
8-dot
single-density
8 68 DPI 101 DPI 288
1
8-dot
double-density
8 68 DPI 203 DPI 576
32
24-dot
single-density
24 203 DPI 101 DPI 288
33
8-dot
double-density
24 203 DPI 203 DPI 576