Jolimark TP860 Series, User Manual

Page: 77 / 109

TP860 User's Manual
- 71 -
5 - - - Not defined
6 - - - Not defined
7 Off 00 0 Underline is not selected
On 80 128 Underline is selected
FS & Enter Chinese mode
Format: ASCI: FS &
Decimal: 28 38
Hex: 1C 26
Description:
Enter the Chinese mode.
FS - Turn Chinese character underline mode on /off
Format: ASCII: FS - n
Decimal: 28 45 n
Hex: 1C 2D n
Description:
n=0, 48 turn off the Chinese character underline mode.
n=1, 49 turn Chinese character underline mode on (one dot high).
n=2, 50 turn Chinese character underline mode on (two dots high).
Underline mode is ignored if 90°clockwise rotation is turned on at the same time.
FS . Exit Chinese mode
Format: ASCII: FS .
Decimal: 28 46
Hex: 1C 2E
Description:
Exit Chinese mode.
FS 2 User-defined Chinese characters
Format: ASCII: FS 2 c1 c2 d1……d72
Decimal: 28 50 c1 c2 d1……d72
Hex: 1C 32 c1 c2 d1……d72
Description:
c1=fe; a1
≤ c2 ≤ fe; 0 ≤ d ≤ 255; c1 is the first code of the character; c2 is the second code of the character. Data
d is arranged from top to down and then from left to right. Each lengthways column has 3 bytes and there
are 24 columns in total.
FS S Set Chinese character spacing
Format: ASCII: FS S n1 n2
Decimal: 28 83 n1 n2
Hex: 1C 53 n1 n2
Description:
0
≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 Set the character left-side spacing to n1* horizontal motion unit, right-side spacing to
n2* horizontal motion unit.
FS W Turn quadruple-size mode on/off for Chinese character
Format: ASCII: FS W n
Decimal: 28 87 n
Hex: 1C 57 n
Description: