Take care that the filter socket and the loose seal are reinstalled with their position unchanged.
Fig. 9.6 Rear and bottom side of the maintenance unit
4. Screw in the condensate reservoir and perform a functional test.
Tools
Only the tools listed in the table are permitted for trouble-free operation of the handpiece P320-2.
A risk of injury by breakage of the tool exists if other tools are used!
Tools for a handpiece with a 1.6 mm collet
- shaft diameter of the tool 1.6 mm -
The tools listed below are constantly being updated. Please consult the current catalogue or the
Internet or joke directly.
Precision diamond tools
(Grit D 126)
Total length
Order no.
Ball, Ø 1.00 mm
19 mm
0 560 570
Ball, Ø 1.60 mm
19 mm
0 560 571
Ball, Ø 2.10 mm
19 mm
0 560 572
Wheel Ø 1.8 mm x 0.70 mm
19 mm
0 560 573
Pear Ø 1.00 mm x 2.00 mm
19 mm
0 560 574
Cylinder, Ø 1.00 mm x 4.00 mm
19 mm
0 560 575
Cylinder, Ø 1.80 mm x 4.00 mm
19 mm
0 560 576
Rounded cylinder, Ø 1.40 mm x 4.00 mm
19 mm
0 560 577
Cone, Ø 1.20 mm x 10.0 mm
19 mm
0 560 578
Cone, Ø 1.60 mm x 10.0 mm
19 mm
0 560 579
13
Important
Important
Caution
Info
10