Johnson T7000 PRO, Service Manual, Page: 53 / 56

53
CHAPTER 7
:
Part Replacement Guide
7.12 Console control board Replacement
1) Turn off power and disconnect the cord from the machine.
2) Remove the four 6 mm screws using a Phillips head screwdriver from underneath
the console to open the upper console cover. (Figure A).
3) Disconnect all of the wires from the console control board. (Figure B).
4) Remove the seven fix screws of CCB using a Phillips head screwdriver. (Figure C).
5) Reverse Steps 1-4 to install a new console control board.
6) Auto Calibration must ALWAYS be run after replacing the console (see Section
3.2).
A B
C