Johnson T7000 PRO, Service Manual, Page: 52 / 56

52
CHAPTER 7
:
Part Replacement Guide
7.11 Incline Motor Replacement
1) Turn off power and disconnect the cord from the machine.
2) Lift the treadmill and support it so that the front wheels are off the floor, or the unit
may be tipped on its side (Figure A).
3) Disconnect the incline motor power cable from the MCB (Figure B).
4) Disconnect the bolt from the incline motor (Figure C).
5) Lift the incline motor away from the treadmill.
6) When installing the new incline motor, make sure to replace the white washers at
the top and bottom.
7) Auto Calibration must ALWAYS be run after replacing the incline motor (see
Section 3.2).
C C
B A
C C
B