Johnson T7000 PRO, Service Manual, Page: 50 / 56

50
CHAPTER 7
:
Part Replacement Guide
7.9 Motor Replacement
1) Turn off power and disconnect the cord from the machine.
2) Remove the front shroud as outlined in Section 7.1.
3) Release the drive belt tensioner as outlined in Section 7.5.
4) Disconnect the motor power cable from the MCB (Figure A).
5) Using an 8 mm Allen wrench, remove the four motor mounting screws (Figure B).
6) Lift the motor away from the treadmill
7) Reverse Steps 1-6 to install a new motor.
8) When reinstalling the motor, make sure the vibration pad is in place.
9) Be careful the diversion when motor remove and reinstall. (Figure C)
A
B
C