Johnson T7000 PRO, Service Manual, Page: 45 / 56

45
CHAPTER 7
:
Part Replacement Guide
7.4 Front Roller Replacement
1) Remove the front shroud as outlined in Section 7.1.
2) Release the tension of running belt
3) Remove the fix bolt of tension wheel set using a 5 mm Allen wrench (Figure A) Be
careful to hold the tension wheel set when fix bolt is releasing.
4) Remove the fix bolts of front roller using a 5 mm Allen wrench (Figure B)
5) Remove the driver belt form front roller. (Figure C)
6) Remove the front roller from the running belt
7) Reverse Steps 1-6 to install a new roller
A
B
C