7
POWER AND CONTROL
Place the device on a surface that is resi-
stant to high temperatures and insert the
plug into a suitable power outlet.
Turn on the device by pressing and hol-
ding the switch (E) ON/OFF.
When switched on, the display lights up in
blue and shows the gradual increase in
temperature until it reaches 188°C. Now it
stops and keep it constant.
The device is designed to automatically
reach the temperature of 188°C.
The working temperature, however, may
be varied at will within the limits from
77°C to 232°C.
By pressing the button (C) the temperature
increases by 11°C each time. During this
operation, the display turns blue.
By pressing the button (D) the temperature
decreased by 11°C each time.
During this operation, the display turns
blue.
After the setting operation the display re-
turns to green indicating the variation of
the temperature up to achieve the set one.
CHANGING THE UNIT OF MEASUREMENT
Celsius C° and Fahrenheit F°
To switch from one scale to another, press
and hold the button (+). The device auto-
matically displays the current temperature
in the desired measurement unit.
USE
For a perfect hairstyle do not use hairspray
or gel before or during styling, but only
later.
Style locks of dry hair, not larger than 5
cm. Brush beforehand to make them soft.
Working on a lock of hair at a time, wrap
it around the bar N.
Hold tight the lock of hair while wrapping.
Wrap the curl up to the scalp being careful
not to get burned with the hot bar.
For thick curls or hard-to-curl-hair hold
the position for about 20 seconds, for ea-
sier to manage hair reduce the time.
When releasing the curl, unroll it about
half a turn (more for longer hair)
Remove the bar from the centre of the
curl. Let the latter cool and avoid touching
it while proceeding in the same way for the
rest of the hair.
When all curls have cooled, comb or brush
to complete the hairstyle.
During the first few minutes of operation,
you may notice smoke or smell: it is nor-
mal and will disappear after a few minu-
tes.
After use turn off the device by holding
down the button (E), remove the plug from
the socket, place it on a heat resistant sur-
face and allow it to cool.
During this phase do not leave the device
unattended and prevent the power cord in
particular, but also other objects, from co-
ming into contact with the hot parts that
are maintained at high temperature for
several additional minutes.
WARNING: It is recommended to use a
heat protection glove to prevent burns.
However, never enter into contact with the
bar (N) to avoid burns.
WARNING: The device is PROFESSIONAL, so
it is recommended for use only by profes-
sionals in the field.
WARNING: Always use the device on third
parties, NEVER ON YOURSELF
CLEANING
The curling iron should be cleaned using
a soft cloth only when cold and when the
plug is removed from the socket.
All manuals and user guides at all-guides.com
