143
MANUAL STARTER
INSPECTION
9
INSPECTION
IMPORTANT:
If excessive wear, crack, defec-
tive or other damage is found on any component,
replace.
Inspect the ratchet and the all springs. If exces-
sive wear or other damage is found, replace.
Inspect the reel and the recoil case. If crack or
other damage is found, replace.
Inspect the recoil rope. If wear or fraying is found,
replace.
Inspect the recoil spring. If crack, deformation or
excessive curve is found, replace.
ASSEMBLY AND
INSTALLATION
Reassembly is the reverse order of disassembly
with special attention to the following steps.
Secure the outer end of the recoil spring on the
boss in the reel and wind the spring toward the
center of the reel in a
counterclockwise
direc-
tion.
Apply
Triple-Guard
grease to the recoil spring.
Install the rope with knot secured in the reel fitting.
006290
006291
1.
Recoil spring
006292
WARNING
Because of the coiled tension in the recoil
spring, wear safety glasses and hand pro-
tection when winding or unwinding this
component.
1.
Rope
006293
1
1
