©2018 Johnson Level & Tool - Rev. 1
13
4. Tap, or press and hold, on the remote control to shift the
Y-axis slope angle down.
5. Tap, or press and hold, on the remote control to shift the
Y-axis slope angle up.
6. Press and hold on the remote control to return the laser
level to tilt mode operation.
Note:
• If the laser beam moves beyond its 5° leveling range, the laser
level will emit an audible alert. Press and hold on the remote
control to bring the slope back within range.
Using Single-Slope Mode
1. After the unit is powered on and it goes through the self-leveling
sequence, press and hold on the remote control for three
seconds to enter single-slope mode. The unit will self-level.
2. The laser level will default to the X-axis. The X-axis LED will
illuminate solid while the Y-axis LED will flash.
3. Tap on the remote control to change to single-slope Y-axis
slope mode. The Y-axis LED will illuminate solid while the X-axis
LED will flash.
4. Tap, or press and hold, on the remote control to shift the
selected axis slope angle down.
5. Tap, or press and hold, on the remote control to shift the
selected axis slope angle up.
6. Press and hold on the remote control to return the laser level
to tilt mode operation.
2810i-Color_Manuals 5/2/18 2:16 PM Page 13