10
©2018 Johnson Level & Tool - Rev. 1
7. Operating Instructions
IMPORTANT:
It is the responsibility of the user to verify the
calibration of the instrument before each use.
Laser Level Placement
1. The laser level should be positioned on a relatively flat and level
surface. It need not be perfectly level.
2. The laser level can also be attached to a tripod via the 5/8
″
-11
tripod screw thread located on the base of the laser level.
3. The laser can be used on the floor in vertical mode by attaching it
to the included vertical mounting plate.
Power On/Off the Laser Level
Press to power on/off the laser level.
Power LED: Lighted LED indicates power is on.
Extinguished LED indicates power is off.
Flashing LED indicates that the batteries are low.
Change Rotational Speed
Press on the remote control to change the rotating speed from
high (800 rpm) to low (300 rpm). This button is not functional
during the self-leveling sequence.
2810i-Color_Manuals 5/2/18 2:16 PM Page 10