12
©2018 Johnson Level & Tool - Rev. 1
Using Scan Mode
Scan mode simulates a dot or line laser to improve beam visibility
through a narrower operating angle.
1. After the unit is powered on and it goes through the self-leveling
sequence, press on the remote control to enter scan mode.
The laser beam will stop rotating and will change to a simulated
laser line.
2. Repeatedly press to change between a narrow line, wide
line, and solid dot.
3. Tap on the remote control to rotate the scan line/dot to
the right.
4. Tap on the remote control to rotate the scan line/dot to
the left.
5. To return the laser beam to rotating, press on either the
remote control or the laser level.
Using Dual-Slope Mode
After the unit is powered on and it goes through the self-leveling
sequence, press on the remote control to enter the X-axis
dual slope mode. The unit will no longer self-level, and the X-axis
LED light on the laser level will illuminate.
1. Tap, or press and hold, on the remote control to shift the
X-axis slope angle down.
2. Tap, or press and hold, on the remote control to shift the
X-axis slope angle up.
3. Press again to select the Y-axis slope. The X-axis LED light
will turn off, and the Y-axis LED light will illuminate.
2810i-Color_Manuals 5/2/18 2:16 PM Page 12