27
English
6.3 S-TEK Twin Tank Kit for both PURE and PRO Harnesses
For this procedure you will require the following three S-TEK components (fig.12):
• S-TEK PURE or PRO Harness (Stainless
Steel or Aluminium) with included Ergo
Nuts (x2)
• S-TEK Wing (normally an S-TEK 40 Wing
or 60 Wing for use with a Twin Tank Kit)
• Your Twin Cylinders with twin bands
installed.
NOTE:
Remove the above items from their
packaging and remove the Low Pressure
Inflator Hose packaged with your S-TEK
40 Wing or 60 Wing. Keep it to one side,
in order to assemble this onto your First
Stage regulator, outlined later in this
manual.
IMPORTANT!
Make sure that your
Twin Cylinders are set correctly prior to
installing your PURE or PRO Harnesses.
Ensure that the space between the center
of the valves and the center of the bands
is identical. An incorrect measurement
could result in damage to both the
Valve Manifold and the Valves (fig.12-1,
fig.12-2).
The upper twin tank band is generally
placed just below the shoulder of
the cylinders (fig.12-3). Ensure that
the lower band is placed so that the
spacing between the two bolts is exactly
11”/279.4mm for perfect backplate hole
alignment (fig.12-4).
A
B
fig. 12-2
fig. 12-1
fig. 12-3
fig. 12-4
A
B
fig. 12
