28
Step 1
Remove the 2 x Ergo Nuts from the
back plate (fig.12-5) and discard the
triangular cardboard tabs (fig.12-6)
Step 2
Using a small flat screwdriver, lever
the retaining tabs (fig.12-7) on both
Ergo Nuts to remove the covers (fig.
12-8).
Step 3
Locate your S-Tek 40 Wing or 60
Wing and Back Plate onto the
mounting bolt of the Twin Tank Kit
(fig.12-9, fig.12-10).
NOTE:
Be aware of the length of
the Mounting Bolt, ensuring it is the
correct length to accept the Ergo
Nuts. If the Mounting Bolts are too
long, they may cause the Ego Nut lid
to unclip from the Ergo Nut housing
(fig.12-11).
fig. 12-9
fig. 12-10
fig. 12-7
fig. 12-8
fig. 12-5
fig. 12-6
