19
English
5.1.2 Shoulder Strap and D-Ring Location
While standing, don your harness.
Lift your elbows ensuring your arms
are parallel to the ground and point
your thumb toward the shoulder
strap (fig. 3) to get an indication of
the correct D-ring placement.
This placement is important for
having easy access to items clipped
onto the D-rings, including Stage
Cylinders.
Feed the webbing through the Tri-
Glide until you have created a loop
(fig.3-1). Move the Tri-Glide and
D-ring unit in the desired direction
along the shoulder strap (fig.3-2)
to locate it in the ideal position as
described above.
Note:
Before this step, decide which
mode suits your requirement best;
Extender or Fixed mode. WEB-LOCs
and Tri-Glides should be removed
or added and placed in the correct
positions as described in the Mode
Section above.
5.1.3 Waist D-Ring (left-side) and Tri-Glide (right-side) Position
As a general rule, the Waist D-ring on the left side
of the S-TEK PURE Harness should be located in
line with an outer leg trouser seam (fig.4).
This D-ring is normally used for clipping off your
SPG and Stage Cylinders.
In Extender Mode, the distance between the WEB-
LOC and the Waist D-ring on your left hip (or the
Tri-Glide on your right hip), allows you to easily
loosen Shoulder Straps to remove your harness or
accurately tighten when donning your harness.
In Fixed Mode, the Shoulder Strap length is fixed.
To change the position, feed the webbing through
the Tri-Glide and Tri-Glide/D-ring unit until you
have created a loop (much the same as the
process described above in the Shoulder Strap
and D-ring section). Move in the desired direction
along the Waist Strap until placement is aligned
with an outer leg trouser seam.
fig. 3
fig. 3-1
fig. 3-2
fig. 4
