Installing the Outer Plate to a PowerDrive or Terrova
Power Cables
Power Cables
1
Deployed
Deployed
Stowed
Stowed
a. Place the mount on an elevated, level surface such
as a workbench or the tailgate of a pickup. The
motor should be in the stowed position.
NOTICE:
A motor may weigh up to 65lbs. We
recommend having a second person help with
the installation.
WARNING
Make sure that the Power Cables from the battery are
disconnected, or that the breaker, if equipped, is “off.”
b. Remove the four sideplate screws using a #3 Phillips
screwdriver. Two of these screws will be located on
each side of the mount.
c. Remove the Right Sideplate.
d. Swing the Left Sideplate out and away from the
Base Extrusion. Removing the sideplates exposes
the Mounting Holes in the Base Extrusion.
2
Right Sideplate
Right Sideplate
2c
Mounting
Mounting
Holes
Holes
Left Sideplate
Left Sideplate
Base Extrusion
Base Extrusion
2d
4 | minnkotamotors.com
©2021 Johnson Outdoors Marine Electronics, Inc.
