©2017 Johnson Level & Tool
21
To use the 3-Point Partial Pythagoras measurement mode:
1. Press the button 5 times until the 3-Point Partial Pythagoras
mode icon ( ) displays at the left of the LCD screen.
2. After selecting the desired unit of measure and reference position,
aim the Laser Distance Meter so that the laser dot is on the selected
target to measure the length “C” in the figure above.
3. Keep your position stable and press the button. The “C”
measurement will appear above the main display.
4. Aim the Laser Distance Meter so that the laser dot is on the
selected target to measure the length “D” in the figure above.
5. Keep your position stable and press the button again. The “C”
and “D” measurements will appear above the main display.
6. Aim the Laser Distance Meter so that the laser dot is on the
selected target to measure the length of the base (represented by
“A” in the figure above).
7. Keep your position stable and press the button again. The “D”
and “A” measurements will appear above the main screen. The
indirect height will appear on the main screen (represented by “B”
in the figure above). The laser will turn off.
8. Press the button to clear the display and take your next
3-Point Partial Pythagoras measurement.
1746i-4_Manuals 6/5/17 1:38 PM Page 21
