16
©2017 Johnson Level & Tool
Area/Square Measurement Mode
1. Press the button once until the Area/Square mode icon ( )
displays near the top left of the LCD screen.
2. After selecting the desired unit of
measure and reference position, aim
the Laser Distance Meter so that the
laser dot is on the selected target to
measure the length.
3. Keep your position stable and press the button. The length
measurement will appear above the main display.
4. Aim the Laser Distance Meter so that the laser dot is on the
selected target to measure the width.
5. Keep your position stable and press the button again. The
length and width measurements will appear on the secondary
screen and the calculated area will appear on the main screen.
The laser will turn off.
6. Press the button again to take your next Area measurement.
1746i-4_Manuals 6/5/17 1:38 PM Page 16
