WT-BAC-IP Gateway Installation Instructions
3
Note:
Return to the Internet Protocol Version 4 (TCP/IPv4) Properties dialogue box after the WT-BAC-IP is
installed. Click
Obtain an IP address automatically
. This option returns your computer back to standard Dynamic
Host Configuration Protocol (DHCP).
5.
Connect an Ethernet cable from your computer to the WT-BAC-IP Gateway.
6.
Plug the 12 VDC adapter into the WT-BAC-IP.
7.
Open the WT-BAC-IP Configuration Tool program.
8.
In the
By MAC Address
tab, type in the MAC address printed on the back of the WT-BAC-IP (in the upper left-
hand corner of the product label).
9.
Click
Connect
in the upper right-hand corner of the display window.
Figure 2: Internet Protocol Version 4 (TCP/IPv4) Properties Dialogue Box
Figure 3: Back Side of the WT-BAC-IP
