6
P5417089
3.3 Efficient Use of Cooling and Heating
(1) Airflow Direction
The appropriate air outlet angle is approx. A
o
as shown
in the table. If the cooling is not sufficient, change the
airflow direction. Pay attention to condensation, which
may occur due to a prolonged cooling operation with
low louver angle.
(Refer to Sections 5.1.6 and 5.2.5 for details.)
(2) Airflow Volume
“AUTO” is usually used.
(1) Airflow Direction
The appropriate air outlet angle is approx. A
o
as shown
in the table. If the heating is not sufficient, change the
airflow direction.
(Refer to Sections 5.1.6 and 5.2.5 for details.)
(2) Airflow Volume
“AUTO” is usually used.
COOLING
HEATING
NOTE
About Multi-Split System
When the number of indoor unit or the operating mode is changed, the air outlet temperature may be
changed and the indoor temperature is changed. In this case, set as follows.
● During Cooling: Lower slightly the temperature setting.
● During Heating: Raise slightly the temperature setting.
Unit Type
A
Step
TIWM006B22S ~ 012B22S
30
3
TIWM015B22S ~ 030B22S
32
4
Unit Type
A
Step
TIWM006B22S ~ 012B22S
55
7
TIWM015B22S ~ 030B22S
50
7
Range of Air Outlet Angle
Air Outlet Angle
A
o
Air Outlet Angle
Range of
Air Outlet Angle
A
o
