16
P5417089
● Adjusting Vertical Blade
Adjust the vertical blade by hand as shown below.
● Automatic Louver Setting
The swing louver is stopped and moved by controlling the wired controller.
The louver automatically closes when the unit is stopped from the wired controller.
TIWM006B22S
~
TIWM012B22S
TIWM015B22S ~ TIWM030B22S
● Louver Angle during Cooling and Dry Operation
The louver angle self-adjusts from its default setting during times of cooling and dry conditions to
prevent condensation buildup. Louver angle changes are not shown on the LCD of wired controller.
● Louver Angle during Heating Operation
The louver angle self-adjusts for heating conditions.
Do not attempt to move the louver by hand as this will damage the automatic louver setting function.
* When the heating operation starts
* When the defrost operation starts
The louver is at a
15-degree angle.
15
o
When the discharge
temperature is higher
than 86°F (30°C), the
louver angle automatically
returns to the setting on
the wired controller.
Above louver angle changes are not shown on the LCD of the wired
controller.
NOTICE
Vertical Blade
Louver
Louver
Louver
Louver
