background image

 

Programming the Daily Schedule – Four-Event 

The schedule setting menu is used to enter the 
occupied and unoccupied time periods for each day of 
the week. The schedule-setting menu reflects either a 
two- or four-event schedule per day based on what 
was selected in the 

Selecting the Number of Events 

(2/4event)

 menu during the configuring process. If the 

schedule-setting menu does not reflect a four-event 
schedule, return to the 

Selecting the Number of Events 

(2/4event)

 menu in the configuration process and 

select four events. 

When changing the time, pressing the UP/DOWN 
arrow keys changes the time in 1-minute increments. 
Holding the keys down changes the time in 30-minute 
increments. 

Note: 

Programming one of the digital inputs to 

remote NSB disables menu. 
To set the time schedule for a four-event schedule, 
follow the steps in Table 7. 

Table 8 shows an example of a four-event office 
schedule. 

Table 7: Programming the  
Daily Schedule – Four-Event 

 

Press MENU from the Status 
Display Menu to enter the Main User 
Menu. 

 

Answer NO to all prompts until the 
schedule set prompt appears in the 
display. Press YES to enter the 
scheduling menu. 

 

Press YES to set the schedule for 
Monday or NO to advance to 
Tuesday. 

 

Press YES to set the occupied start 
time for Monday or NO to advance 
to Tuesday (selecting NO leaves the 
thermostat in the unoccupied mode 
for the entire day). 

 

Use the UP/DOWN arrow keys to 
set the first occupied start time. 
Press YES to enter the time. 

 

Use the UP/DOWN arrow keys to 
set the first unoccupied start time. 
Press YES to enter the time. 

 

Use the UP/DOWN arrow keys to 
set the second occupied start time. 
Press YES to enter the time. 

 

Use the UP/DOWN arrow keys to 
set the second unoccupied start 
time. Press YES to enter the time. 

 

Press YES to set the schedule for 
Tuesday or NO to advance to 
Wednesday. 

 

Press YES to copy the schedule 
from the previous day. Press NO to 
set a different schedule. 

 

If YES was pressed, the next prompt 
will be for Wednesday. Repeat 
procedure for all days of the week. 

 

After setting the schedule for all 
days of the week, following the last 
entry for Sunday, press YES to 
return to the Status Display Menu or 
NO to start again at Monday. 

Occupied
day? Y/N 

Occupied
12:00 AM 

Unoccup
12:00 AM 

Occupie2
12:00 AM

 

Unoccup2
12:00 AM

 

Tuesday
set? Y/N 

RoomTemp 
75.0

°

F

 

Copy Y/N
previous 

Schedule 
set? Y/N 

Wednesda
set? N/A 

Monday 
set? Y/N 

Exit?
 Y/N

 

 

16    

T600MEP-2 Programmable Economizer Thermostat Installation Instructions 

Summary of Contents for T600MEP-2



















Reviews: