Johnson Controls PENN ACT2, Technical Bulletin, Page: 28 / 116

Maestro Software
28
b. Click the Create New Unit button.
Figure 24: Select Unit Dialog Box
c. Type in the unit’s communication ID. (You must use 1 for the
first controller at each site, 2 for the second controller, 3 for the
third, and so on.)
d. Select the type and version of controller from the list.
Notes: Units named TituS appear in the New Unit Information list
box, and TituS commands appear in the Maestro menus.
TituS is the same as ACT2. If an ACT2 version does not
appear in the list box, choose the closest TituS version.