Johnson Controls NIE29 Series, Installation Instructions Manual

Page: 18 / 32

Table 6: Rules for KNX Protocol
Rules/Maximums Allowed Category
No termination Termination
At least ISO 9002 Manufacturer's Quality
Management System
Table 7: Guidelines for L
ON
W
ORKS
Network Bus Topology
Maximum Segment Length with
FTT10 and/or LPT10 Devices
1
Maximum Segment Length with FTT10
Devices Only
1
Cable Type
2,200 m (7,218 ft) 2,700 m (8,858 ft) Belden ® 85102 Cable
2,200 m (7,218 ft) 2,700 m (8,858 ft) Belden 8471 Cable
1,150 m (3,773 ft) 1,400 m (4,593 ft) Level IV 0.6 mm (22 AWG)
750 m (2,460 ft) 900 m (2,953 ft) JY (St.) Y 2 x 2 x 0.8
1 For the bus topology, the maximum length stub cable is 3 m (10 ft), and the stub lengths must be calculated into the overall
segment length.
Table 8: Guidelines for L
ON
W
ORKS
Network Free Topology
Maximum Segment Length with
FTT10 and/or LPT10 Devices Maximum Node-to-Node Distance Cable Type
500 m (1,640 ft) 500 m (1,640 ft) Belden 85102 Cable
500 m (1,640 ft) 500 m (1,640 ft) Belden 8471 Cable
500 m (1,640 ft) 400 m (1,312 ft) Level IV 0.6 mm (22 AWG)
500 m (1,640 ft) 320 m (1,050 ft) JY (St.) Y 2 x 2 x 0.8
Table 9: Maximum Number of Devices per L
ON
W
ORKS
Network Segment
Maximum Allowed Device Type
32 L
ON
W
ORKS
devices supported (on NIE292x Type models only). FTT-10 Nodes Only
([FTT10 x 2] + LPT10) < 32 Mixed FTT-10 and LPT-10
Nodes
1
Terminators
2 bus type EOL terminators required (NU-EOL202-0) Bus Topology
1 free topology terminator required (NU-EOL203-0) Free Topology
Maximum of 1 per segment Physical Layer Repeaters
1 Each LPT10 channel segment (between repeaters) requires its own power supply. Other factors, such as power consumption
of individual LPT10 devices, may limit a segment to fewer devices. The NCE does not have an internal network terminator.
Table 10: NIE Ethernet Network Rules
Rules/Maximums Allowed
1 Category
Point-to-point star topology with network hubs and switches General
Maximum of 100 supervisory devices may be connected to one site in the Metasys system. Number of Devices
2,000 m (6,600 ft) for plastic or glass fiber optic with external adapter Line Length and Type
100 m (330 ft) CAT5 cable
For 10/100 BaseT, no line terminators allowed Terminations
18 NIE29 Installation Instructions