JWS-3 Operation
Administration Tab
38
JWS-3 Installation and Operation Manual - P/N: 53550:Rev: A1 1/12/10
4.7.2 System Settings
Selecting System Settings allows you to make JWS-3 browser configuration settings.
Figure 4.14 System Settings
General Settings
Site Name
This is a user defined field designed to facilitate a unique descriptive name for the
JWS-3.
Non-Admin User Access
This setting defines whether or not operators will have access to the
JWS-3.
Beep on Unacknowledged Events
Choose this option to enable an audible reminder of
unacknowledged events. When this is set to
Yes
, the JWS-3 will beep at 3-second intervals and will
continue until no unacknowledged events are shown in the Multiple Events List.
Display Labels
This option determines whether on not label names appear in the
Trouble Reminder
If there is an active trouble on the network, every 24 hours at 11:00 AM, a
trouble reminder message will be generated across the network.
Network Update
Select
Yes
to have the JWS-3 auto detect points daily.
Network Update Time
If the JWS-3 is configured to auto detect points daily, this field is used to
select the time you want the JWS-3 to perform this action.
NCM Settings
Node
The node where the NCM is located on the NFN network.
Channel A/B Threshold
Threshold settings are used according to the amount of network noise
present; changing the threshold settings will initialize the NCM board itself.
Style
Select style 4 or style 7.
Network Settings
Verifire User
Select
Yes
to allow access to JWS-3 from VeriFire Tools through an IP connection.
