Johnson Controls (H,Y)VAHP072B31CW Installation And Maintenance Manual Download

Page: 26 / 80

P00877Q

If transporting after unpacking, protect the unit with corrugated material, styrofoam, bubble pack, or a tarp.

5.2 Handling of Outdoor Unit

'RQRWSODFHRUOHDYHDQ\IRUHLJQREMHFWVFDEOHVWRROVLQVLGHWKHRXWGRRUXQLWRUFRQWUROPRGXOH
DQGYHULI\WKDWQRWKLQJUHPDLQVWKHUHSULRUWRLQVWDOODWLRQDQGWHVWUXQ'DPDJHDQG¿UHFDQUHVXOW

due to carelessness.

NOTE

When using a forklift, do not insert forks into

the slots at the unit side panels. The unit can
sustain damage.

Do not apply excessive force to the squared

slots with forks or other materials. The bottom
of the unit can become deformed.
* Do not push the bottom base with forks.
* Do not use a roller.

'XULQJWUDQVSRUWDWLRQGRQRWDOORZWKHEDFNUHVWRIWKHIRUNOLIWWRFRPHLQWRFRQWDFWZLWKWKHXQLW

Sudden forward movement on the forklift can cause damage to the unit heat exchanger.

Forks

The slots on
the unit side

Do not apply an excessive force.
(Either Side)

Keep the appropriate interval
(at least 1-15/16 inch).

Touching the Unit

Backrest

Not Touching the Unit

Summary of Contents for (H,Y)VAHP072B31CW

















































































Search results

Summary of Contents for (H,Y)VAHP072B31CW

Reviews:

Related manuals for (H,Y)VAHP072B31CW

Brands by name

Popular brands

Johnson Controls (H,Y)VAHP072B31CW, Installation And Maintenance Manual

Search results

Summary of Contents for (H,Y)VAHP072B31CW

Reviews:

Related manuals for (H,Y)VAHP072B31CW

Brands by name

Popular brands