manualshive.com logo in svg

Johnson Controls FX-PCV18 Series, Installation Instructions Manual, Page: 15 / 30

Share
Download
Johnson Controls FX-PCV18 Series Installation Instructions Manual Download Page 15

Sensor replacement and reuse scenarios table

Table 3: Sensor replacement and reuse scenarios

Sensor used with PCV1410,

PCV1415, PCV1420, PCV1440

Controller

Sensor replacement and

reuse scenarios

Instructions

Replace a sensor with an NS

Series Sensor

Note: 

Replacing a

TE-6xxx Series Sensor

is recommended over

reusing the sensor

because it provides

a usable port at the

sensor location for

commissioning.

Replacing a TE-6xxx series

sensor

TE-6xxx Series (see 

TE-6xxx

series sensor connected to FX-

PCV Controller

)

Reuse a sensor, installing an

adapter at an FX-PCV controller

location

Reusing a TE-6xxx series sensor

AP-TMZ1600-0 (see 

Replacing

an AP-TMZ1600-0 sensor

connected to an FX-PCV

Controller

)

Replace a sensor with an NS

Series Sensor

Replacing an AP-TMZ1600-0

sensor connected to an FX-PCV

Controller

TE-7710-0 Series Wireless

Transmitter and TE-7720-0

Wireless Receiver (see

Replacing a TE-7710-0 Series

Wireless Transmitter and

TE-7720-0 Wireless Receiver

connected to an FX-PCV

Controller

)

Replace with an FX-WRZ Series

Wireless Sensor and an FX-

WRZ7860 Series One-to-One

Receiver

Replacing a TE-7710-0 Series

Wireless Transmitter and

TE-7720-0 Wireless Receiver

connected to an FX-PCV

Controller

Replace a sensor with a TE-730

Series Sensor

Replacing a TE-700 Series

sensor

TE-700 Series (see 

TE-700 Series

Sensor connected to an FX-PCV

Controller

)

Reuse a sensor

Reusing a TE-700 Series sensor

Sensor replacement scenario descriptions

TE-6xxx series sensor connected to FX-PCV Controller

To replace a TE-6xxx Series Sensor with a functionally equivalent NS Series Network Sensor, follow

the instructions in the 

Replacing a TE-6xxx series sensor

 section.

To reuse a TE-6xxx Series Sensor connected to an FX-PCV controller, follow the instructions in the

Reusing a TE-6xxx series sensor

 section.

Replacing the sensor with an NS Series Network Sensor is preferred to reusing the TE-6xxx Series

Sensor because the NS sensor allows for easier controller commissioning. Be sure to use an

NS sensor with similar dimensions as the existing sensor in order to match the original sensor

installation.

15

FX-PCV1826/1832 Programmable VAV Box Controller Installation Instructions

Summary of Contents for FX-PCV18 Series































Reviews:

No comments