Table 11: FX-PCG26 technical specifications
Mounting
Horizontal on single 35 mm DIN rail mount (preferred), or screw
mount on flat surface with three integral mounting clips on
controller
Housing
Enclosure material:
ABS and polycarbonate, Rating V0
minimum
Protection Class: IP20 (IEC529)
Dimensions(Height x Width x
Depth)
FX-PCG26 Series:
150 mm x 190 mm x 53 mm (5-7/8 in. x 7-1/2
in. x 2-1/8 in.) including terminals and mounting clips
Weight
0.5 kg (1.1 lb)
United States:
UL Listed, File E107041, CCN PAZX, UL 916,
Energy Management Equipment; UL Listed, File S4977, UUKL 864
- 10th Edition, Smoke Control Equipment (MS-FEC2611-0U and
MS-FEC2621-0U models only)
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Canada:
UL Listed, File E107041, CCN PAZX7 CAN/CSA C22.2
No.205, Signal Equipment
Industry Canada Compliant, ICES-003
Europe:
Johnson Controls declares that this product is in
compliance with the essential requirements and other relevant
provisions of the EMC Directive.
Australia and New Zealand:
RCM Mark, Australia/NZ Emissions
Compliant
Compliance
BACnet International:
BACnet Testing Laboratories (BTL)
Protocol Revision 9 Listed BACnet Application Specific Controller
(B-ASC)
The performance specifications are nominal and conform to acceptable industry standard. For
application at conditions beyond these specifications, consult the local Johnson Controls
®
office. Johnson
Controls shall not be liable for damages resulting from misapplication or misuse of its products.
Points of single contact
APAC
Europe
NA/SA
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 32 CHANGJIJANG RD NEW DISTRICT
WUXI JIANGSU PROVINCE 214028
CHINA
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
© 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document
revision and are subject to change without notice.
www.johnsoncontrols.com
