FX-BTCVT Bluetooth® Commissioning Converter Installation Instructions
2
North American Emissions Compliance
United States
Canada
Installation
Observe the following guidelines and see the
Mounting
section in this document:
•
Verify that all parts shipped with the Bluetooth
Commissioning Converter.
•
Do not remove the Bluetooth Commissioning
Converter from the blue protective boot. If removed
from the protective boot, the Bluetooth
Commissioning Converter is prone to physical
damage.
Parts Included
•
one Bluetooth Commissioning Converter
•
one 1.5 m (5 ft) retractable cable
•
one set of Installation Instructions
•
one hanging strap with internal magnet
Special Tools Needed
The Bluetooth Commissioning Converter provides a
wireless link to the MS/TP bus. To access the Bluetooth
Commissioning Converter, you need the following:
•
a Bluetooth wireless adapter (integral to computer
or Universal Serial Bus [USB] dongle)
•
laptop computer running
Microsoft® Windows XP® operating system with
the wireless adapter installed
•
FX-PCT software
This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when this equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case
the user will be required to correct the interference
at his/her own expense.
RF Transmitters: Compliance Statement
(Part 15.19)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference,
and
2.
This device must accept any interference
received, including interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
This Class (A) digital apparatus meets all the
requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
RF Transmitters: Industry Canada Statement
The term
IC
before the certification/registration
number only signifies that the Industry Canada
technical specifications were met.
Le terme « IC » précédant le numéro d'accréditation/
inscription signifie simplement que le produit est
conforme aux spécifications techniques d'Industry
Canada.
IMPORTANT:
Magnetic fields can cause damage
to magnetic storage media, including hard disks,
credit cards, and video tapes. Keep all magnets
away from all types of magnetic media.
