Johnson Controls FMS-2000C User Manual Download Page 26

Page: 26 / 62

FMS-2000C

LIT-12013504

Setting the alarms for the first time

1. On the home screen, tap the

Isolation Mode

quick link.

2. On the

ROOM

screen, expand

Isolation Mode

and choose from the following options:

•

Positive

•

Negative

•

Neutral

Optional:

If you have a secondary monitored space, tap

Secondary

and expand

Isolation Mode

to choose the isolation mode for

the secondary monitored space.

To confirm the new settings, tap the

Checkmark

icon. The home screen appears.

5. On the home screen, tap the

Settings

icon.

6. On the

SETTINGS

screen, tap

Analog I/O

To find the analog input you want to set up the alarm for, swipe left.

8. Scroll down and tap the

Alarm Setup

arrow.

9. Switch

Alarm Enabled

on.

10. Tap the

High Alarm Setpoint

arrow.

11. Enter the

High Alarm Setpoint

and tap the

Checkmark

to confirm your settings.

12. Tap the

High Warning Limit

arrow.

13. Enter the

High Warning Limit

and tap the

Checkmark

to confirm your settings.

14. Tap the

Low Warning Limit

arrow.

15. Enter the

Low Warning Limit

and tap the

Checkmark

to confirm your settings.

Note:

If you configure your space for both positive and negative isolation mode, repeat this process and set up an alarm for the positive

and the negative isolation mode.

Changing the alarm limits

1. On the home screen, tap the

Settings

icon.

2. On the

SETTINGS

screen, tap

Analog I/O

To find the analog input you want to set up the alarm for, swipe left.

4. Scroll down and tap the

Alarm Setup

arrow.

5. Switch

Alarm Enabled

on.

6. Tap the

High Alarm Setpoint

arrow.

7. Enter the

High Alarm Setpoint

and tap the

Checkmark

to confirm your settings.

8. Tap the

High Warning Limit

arrow.

9. Enter the

High Warning Limit

and tap the

Checkmark

to confirm your settings.

10. Tap the

Low Warning Limit

arrow.

11. Enter the

Low Warning Limit

and tap the

Checkmark

to confirm your settings.

Naming the pressure analog input

Set the name you want to appear on the home screen for a certain analog input. If you set up the FMS-2000C controller in portrait mode

you can have 16 characters. In landscape mode, you can have 12 characters.

1. On the home screen, tap the

Settings

icon.

2. On the

SETTINGS

screen, tap

Analog I/O

To find the analog input you want to set up a name for, swipe left.

4. Scroll down and tap the

Name

arrow.

5. Enter a name for the analog input and tap the

Checkmark

icon to confirm it.

Summary of Contents for FMS-2000C































































Search results

Summary of Contents for FMS-2000C

Reviews:

Related manuals for FMS-2000C

Brands by name

Popular brands

Johnson Controls FMS-2000C, User Manual

Search results

Summary of Contents for FMS-2000C

Reviews:

Related manuals for FMS-2000C

Brands by name

Popular brands