FlexSys
Underfloor Air Terminal (Constant Volume)
Élan - 06R - 180
Model:
©2016 Johnson Controls | The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local
Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.
© 2016 AirFixture, LLC
2
Installation / Operation Manual
V160829
OPERATION:
• Increase Air Flow:
Slide control lever in a counter-clockwise direction to open
the damper plate, increasing air flow.
• Reduce Air Flow:
Slide control lever in a clockwise direction to close the
damper plate, reducing air flow.
MAINTENANCE:
To remove debris that has collected in the catch pan:
1.
Turn center screw counter-clockwise to loosen retention bar.
Set retention bar as low as possible, to allow easier access
to the catch pan.
2.
Lift unit as far up as possible. Keep unit level; tilting it too far
may cause debris to dump out under the floor.
3.
While holding unit, vacuum debris out of the catch pan.
4.
Lower unit back down into floor. Using center screw, tighten
retention bar to secure unit back in place.
PARTS:
• Grille Cover: P/N 620.0120.05
