Johnson Controls FEU2610 Series, Installation Instructions Manual

Page: 4 / 15

FEU2610 Field Equipment Controller Installation Instructions
4
Wall Mount Applications
To mount the FEU26 on a wall (or other vertical surface):
1. Ensure that all three mounting clips are pulled outward and snapped firmly into the extended position. See
Figure 2
.
2. Mark the location of the mounting holes on the wall using the dimensions in
Figure 2
and according to the
orientation in
Figure 3
. (Or hold the FEU up to the wall as a template and mark the hole locations.)
3. Drill holes in the wall at the locations marked in Step 2, and insert appropriate wall anchors in all three holes (if
necessary).
4. Hold the FEU26 in place, and insert the screws through the mounting clips and into the holes. Carefully tighten
all of the screws.
IMPORTANT: Do not over tighten the mounting screws. Over tightening the screws may damage the mounting
clips.
Figure 2: DIN Rail and Mounting Clip Features on the Back of an FEU26, mm (in.)
48
1-7/8 ( )
90
3-1/2 ( )
90
3-1/2 ( )
143
5-5/8 ( )
127
5 ( )
DIN Rail
Channel
DIN Rail
Hooks
95
3-3/4 ( )
F
IG
:F
E
C2
62
0
m
n
tdi
m
Mounting Clips
(in Extended Positions)
48
1-7/8 ( )
48
1-7/8 ( )
Figure 3: Required Orientation for Wall Mount Applications