manualshive.com logo in svg

Johnson Controls FAC2611, Installation Manual, Page: 21 / 24

Share
Download
Johnson Controls FAC2611 Installation Manual Download Page 21

Accessories

See the below table for field controller accessories

ordering information.

Table  9: Accessories ordering information

Product Code Number

Description

MS-BTCVT-1

Bluetooth Commissioning Converter

MS-DIS1710-0

Local Controller Display

MS-WNC1800

Wireless Coordinator Gateway for use in the ZFR1800 Wireless Field Bus System. For more information,

refer to the 

WNC1800/ZFR182x Pro Series Wireless Field Bus System Bulletin (LIT-12012356)

.

MS-ZFR1810-1

Wireless Field Bus Coordinator for use in the ZFR1800 Wireless Field Bus System. For more information,

refer to the 

ZFR1800 Series Wireless Field Bus System Product Bulletin (LIT-12011336)

.

MS-ZFR1811-1

Wireless Field Bus Router for use in ZFR1800 Wireless Field Bus System. For more information, refer to the

ZFR1800 Series Wireless Field Bus System Product Bulletin (LIT-12011336)

.

MS-ZFR1812-1

Wall Mount Wireless Field Bus Router for use in ZFR1800 Wireless Field Bus System. For more information,

refer to the 

ZFR1800 Series Wireless Field Bus System Product Bulletin (LIT-12011336)

.

MS-ZFR1821

Wireless Field Bus Router for use in ZFR1800 Wireless Field Bus System. For more information, refer to the

WNC1800/ZFR182x Pro Series Wireless Field Bus System Bulletin (LIT-12012356)

.

MS-ZFR1822

Wall Mount Wireless Field Bus Router for use in ZFR1800 Wireless Field Bus System. For more information,

refer to the 

WNC1800/ZFR182x Pro Series Wireless Field Bus System Bulletin (LIT-12012356)

.

TP-2420

Transformer, 120 VAC Primary to 24 VAC secondary, 20 VA, Wall Plug

Y65T31-0

Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount, 8 in. Primary Leads and

Secondary Screw Terminals, Class 2

Note: 

Additional Y6x-x Series transformers are also available. Refer to the 

Series Y63, Y64, Y65, Y66,

and Y69 Transformers Product Bulletin (LIT-125755)

 for more information.

AS-XFR050-0

Power transformer (Class 2, 24 VAC, 50 VA maximum output), no enclosure

AP-TBK4SA-0

Replacement SA Bus Terminal Blocks, 4-Position, Brown (Bulk Pack of 10)

AP-TBK4FC-0

Replacement FC Bus Terminal Blocks, 4-Position, Blue (Bulk Pack of 10)

AP-TBK3PW-0

Replacement Power Terminal Blocks, 3-Position, Gray (Bulk Pack of 10)

ZFR-USBHA-0

USB Dongle with ZFR Driver provides a wireless connection through CCT to allow wireless commissioning

of the wirelessly enabled FEC, FAC, IOM, and VMA16 field controllers. Also allows use of the ZFR Checkout

Tool (ZCT) in CCT.

Note: 

The ZFR-USBHA-0 replaces the IA OEM DAUBI_2400 ZigBee

®

 USB dongle. For additional

information on the ZFR-USBHA-0 ZigBee dongle, refer to the 

ZFR1800 Series Wireless Field Bus System

Technical Bulletin (LIT-12011295)

 or 

ZFR1800 Series Wireless Field Bus System Quick Reference Guide

(LIT-12011630).

FAC2611 Advanced Application Field Equipment Controller Installation Guide

21

Summary of Contents for FAC2611

























Reviews:

No comments