Johnson & Johnson DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail Surgical Technique Download Page 60

Page: 60 / 69

Titanium Cannulated Tibial Nail Expert Nailing System Surgical Technique DePuy Synthes Trauma 59

03.010.093

reaming rod Push rod, with ball handle

03.010.103

◊

3.2 mm three-fluted drill bit,
quick coupling, 145 mm

03.010.104

◊

4.2 mm three-fluted drill bit,
quick coupling, 145 mm

03.010.092

ball hex Screwdriver, 8 mm

03.010.106

direct measuring device, for locking
screws to 100 mm, for Im nails

03.010.107

Stardrive Screwdriver, t25, self-retaining

03.010.110

cannulated Stardrive Screwdriver, t40,
self-retaining

Instruments

◊ available nonsterile or sterile-packed. add “S” to product number to indicate

sterile product.

Summary of Contents for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail






































































Search results

Summary of Contents for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Reviews:

Related manuals for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Brands by name

Popular brands

Johnson & Johnson DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail, Surgical Technique

Search results

Summary of Contents for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Reviews:

Related manuals for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Brands by name

Popular brands