Johnson & Johnson DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail Surgical Technique Download Page 57

Page: 57 / 69

56 DePuy Synthes Trauma Titanium Cannulated Tibial Nail Expert Nailing System Surgical Technique

InStrumentS

03.010.015

compression device, for titanium
cannulated tibial nails–ex

03.010.021

radiographic ruler, for titanium
cannulated tibial nails

03.010.023

radiographic canal Width estimator,
for Im nails

03.010.035

12.0 mm Protection Sleeve

03.010.024

holding device, for guide Wires and
reaming rods

03.010.036

◊

12.0 mm cannulated drill bit, large quick
coupling, 190 mm

◊ available nonsterile or sterile-packed. add “S” to product number to indicate

sterile product.

Summary of Contents for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail






































































Search results

Summary of Contents for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Reviews:

Related manuals for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Brands by name

Popular brands

Johnson & Johnson DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail, Surgical Technique

Search results

Summary of Contents for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Reviews:

Related manuals for DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Brands by name

Popular brands