Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 159 / 270

Z370584 Rev. D
7-1
7 — System Configuration
• “Setting the Maximum IV Pole Height” on page 7-1
• “Testing the IV Pole” on page 7-2
• “Event Log” on page 7-3
• “Wireless Foot Pedal Setup” on page 7-4
• “VERITAS Remote Control Setup” on page 7-9
• “System Versions” on page 7-10
• “System Self Test” on page 7-11
• “Language Selection” on page 7-12
• “Surgical Media Center (SMC) (Optional)” on page 7-13
• “Set System Date and Time” on page 7-15
• “Set Units of Measure for Vacuum” on page 7-16
• “Service Interval” on page 7-17
• “Import/Export Database” on page 7-17
• “Backup All” on page 7-20
• “Print to File” on page 7-21
• “Restore Database” on page 7-21
• “Restore All” on page 7-23
• “Delete a Backup Database” on page 7-25
Setting the Maximum IV Pole Height
Follow these steps to set the maximum IV pole height.
NOTE: The Configuration screen is only available when you are not in a case. If you need to
access the Configuration screens you must select End Case, select Next Case, then
tap the Configuration button.
1. Tap Configuration .
2. Tap the Max IV Pole Height button.