Johnson & Johnson Surgical Vision Veritas, Operator'S Manual, Page: 161 / 270

System Configuration
Z370584 Rev. D Event Log
7-3
Figure 7-2 — IV Pole Test
3. Tap the Start button under Send to Top to move the IV pole to maximum height.
4. Tap the Start button under Send to 30 cm to move the IV pole to a height of 30 cm.
5. Tap the Start button under Send to Bottom to move the IV pole to minimum height.
6. Tap Finished to close the IV Pole Test dialog box and return to the Configuration screen.
7. Tap Exit to close the Configuration screen.
Event Log
1. Tap Configuration .
2. Tap the Event Log button.