Johnson & Johnson Surgical Vision Veritas Operator'S Manual Download Page 181

Page: 181 / 270

System Configuration

Z370584 Rev. D

Restore All

7-23

Figure 7-25 — Database Restored Confirmation Dialog Box

6. Tap

Finished

to close the screen.

7. Tap

Exit

to close the Configuration screen.

Restore All

Restore All restores a database that was saved on the USB device through the Backup All
option.

NOTE: If a file name has the suffix “(WS PRO)”, it indicates the database was backed up from

a WHITESTAR SIGNATURE

™

PRO System and can be restored and upgraded on the

VERITAS Vision System.

From Configuration, tap

Restore All

NOTE: Ensure you place the USB device into the USB port on the back of the system.

Summary of Contents for Veritas















































































































































































































































































Search results

Summary of Contents for Veritas

Reviews:

Related manuals for Veritas

Brands by name

Popular brands

Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Search results

Summary of Contents for Veritas

Reviews:

Related manuals for Veritas

Brands by name

Popular brands