manualshive.com logo in svg

Johnny Vac JVC70RIDER, Operator'S Manual

Share
Download
Johnny Vac JVC70RIDER Operator'S Manual Download Page 3

3

JVC70RIDER

OPERATOR MANUAL

www.johnnyvac.com

   Contents

Safety  Precautions.....................................4   

Operation

...............................................8

Machine Components................................8
Controls and instruments.......................... 9
Operation principle..................................10   
Scrubbing method....................................10   
Brush information....................................11  
Machine setup..........................................12  
Install queegee assembly ........................12  
Install brush/pad holder/cleaning pad......12
Fill solution tank......................................13 
Machine operation...................................14
Pre-operational check..............................14 
Before operation......................................14
Scrubbing................................................15 
During operation......................................17 
Scrubbing method....................................17 
Water gauge tube of solution tank............18 
Recovery tank full indicator.....................19 
Battery Voltage Indicator.........................19
Overload reset switch..............................20
Backup light.............................................20

Drain and clean the recovery tank............21
Troubleshooting.......................................24

Maintenance

........................................26

Maintenance form...................................26
Battery charge..........................................27
Precautions for Battery installation and 
Use...........................................................27
Brush, pad holder, cleaning pad 
replacement.............................................28
Brush and cleaning pad installation.........28
Squeegee blade........................................29
Squeegee blade replacement....................30
Squeegee blade adjustment......................33
Push, Tow and transport the machine.......34
Machine storage.......................................35
Frost protection........................................35
Charger LED indicator.............................35

Specifications

.......................................36

Machine dimension /capacity..................36
Type.........................................................36
Duty caster...............................................36
Machine dimensions................................37

Contents

Summary of Contents for JVC70RIDER









































Reviews:

No comments

Brands by name

Popular brands

Load more brands