
Johnny Vac V1 (14-10)
5
4. Before leaving or servicing the machine:
•
Stop the machine on level surfaces.
•
Turn off machine and remove the key.
5. When servicing the machine:
•
The job must be done in an environment with good illumination and high visibility.
•
Avoid moving parts. Do not wear loose jackets, shirts or sleeves when working on the machine.
Get long hair tied.
•
Do not push or tow the machine on inclines with the brake disabled.
•
Do not power spray or hose off the machine. Electrical malfunction may occur.
•
Disconnect battery before working on the machine.
•
Only trained or authorized personnel must install the batteries.
•
Well-trained technicians must carry out maintenance.
•
Do not refit any part of the machine that is different from its original design.
•
Use the parts provided or approved by JOHNNY VAC.
•
Wear necessary personal protective equipment as recommended in this manual.
FOR SAFETY
Wear hearing protection devices.
Wear eye protection devices.
Wear protection gloves.
Wear a dust mask.
6. When loading/unloading the machine onto/off the truck or trailer:
•
Drain the tanks before loading machine.
•
Lower the scrub head and squeegee before tying down the machine.
•
Turn off the machine and remove the key.
•
Use a ramp, truck or trailer that can support the machine and operator's weight.
•
Use a winch. Do not push the machine onto the truck or trailer/ pull it off the truck or trailer unless
loading height is less than 380 mm (15”) above the ground.
•
Block the machine tires.
•
Tie the machine to the truck or trailer.