![John Lewis JLWD 1613 User Manual Download Page 28](http://html1.mh-extra.com/html/john-lewis/jlwd-1613/jlwd-1613_user-manual_2022284028.webp)
• The drying indicator
starts to flash.
• The display shows the door locked
indicator
.
If you set only 10 minutes of drying,
the appliance performs only a
cooling phase.
If the laundry is not sufficiently dry,
set a short drying time again.
End of the drying programme
The appliance stops automatically.
• The acoustic signals operate (if they are active).
• In the display comes on.
• The Start/Pause indicator goes off.
• During the last minutes of the drying cycle the
appliance performs a cooling and anti-crease
phase. The door is still locked.
When the door locked indicator
goes off,
you can open the door.
1. Press the On/Off button for several seconds
to deactivate the appliance.
A few minutes after the end of the programme,
the energy saving function deactivates the
appliance automatically.
2. Remove the laundry from the appliance.
Make sure that the drum is empty.
3. Keep the door ajar to prevent mildew and
odours.
Fluff in the drum
During the washing and/or drying phase, some
types of fabric, (sponge, wool, sweatshirt) could
release fluff.
The released fluff could stick to the fabrics
during the next cycle.
To prevent fluff in your laundry, we recommend
that you:
• Do not wash dark fabrics after you have
washed and dried light coloured fabrics (new
sponge, wool, sweatshirt ) and vice versa.
• Line dry these types of fabrics when they are
washed the first time.
• Clean the drain filter.
• Clean the empty drum, the gasket and the door
with a wet cloth after the drying phase.
Washer Dryer User Manual
28