John Lewis JLFSEC612, User Manual

Page: 38 / 52

Removing the shelf supports
To clean the oven, remove the shelf supports.
1. Pull the front of the shelf support away from
the side wall.
2. Pull the rear end of the shelf support away
from the side wall and remove it.
2
1
The retaining pins on the telescopic
runners must point to the front.
Install the shelf supports in the opposite
sequence.
Caution! Make sure that the
longer fixing wire is in the
front. The ends of the two
wires must point to the rear.
Incorrect installation can
cause damage to the enamel.
Removing and cleaning the
door glasses - top oven
The door glass in your product can
be different in type and shape from
the examples you see in the image.
The number of glasses can also be
different.
1. Open the door.
2. Hold the door trim on the top edge of the
door at the two sides and push inwards to
release the clip seal.
1
2
1
3. Pull the door trim to the front to remove it.
4. Remove the glass panels.
To install the panels, do the same steps in
reverse.
Removing and cleaning the
door glasses - main oven
The door glass in your product can
be different in type and shape from
the example you see in the image.
The number of glasses can also be
different.
1. Push the door trim at one side to remove it.
Cooker User Manual 38