Programme buttons
To select a washing programme, press one of
these buttons. The related indicator comes on.
Indicators
In addition to the programme indicators other
indicators help you in the use of your appliance.
Programme
time
This indicator comes on when
you set and start the washing
programme and goes off when
the washing programme is
completed.
End of cycle
This indicator comes on when the
washing programme ends.
Multi tab
This indicator comes on when
you activate the Multi tab
function.
Rinse aid
1)
This indicator comes on when the
rinse aid has run out.
Salt
1)
This indicator comes on when the
salt has run out.
The salt indicator can remain on
for a few hours after that salt has
been replenished (assuming the
appliance remains switched on).
The operation of the appliance is
not affected.
1) The salt and rinse aid indicators are never on while a
washing programme is running even if filling with salt and/
or rinse aid is necessary.
Function buttons
The following operations can be done with
these buttons:
• The electronic setting of the water softener.
• The cancellation of a washing programme in
progress.
• The cancellation of the delay start.
• The activation of the Multi tab function.
• The activation of the rinse aid dispenser.
Setting mode
The appliance must be in setting mode
for these operations:
• To start a washing programme.
• To start a delay start.
• To adjust electronically the level of the water
softener.
• To activate the Multi tab function.
• To activate the rinse aid dispenser.
Switch on the appliance. The appliance is
in setting mode when:
• All the programme indicators come on.
Switch on the appliance. The appliance is
not in setting mode when:
• Only one programme indicator comes on.
• The display shows the time of the washing
programme or of the delay start.
– Cancel the programme or the delay start
to go back to the setting mode. Refer to
'Select and start a washing programme'.
8 Dishwasher
user
manual
