When you cancel a delay start, the
appliance goes back to setting mode.
You have to set the washing
programme again.
Warning! Interrupt or cancel a
washing programme in progress
only if it’s absolutely necessary.
Hot steam may escape when the
appliance door is opened. Open
the door carefully.
Interrupting a washing programme
in progress
1. Open the appliance door. The washing
programme stops.
2. Close the appliance door. The programme
continues from the point at which it was
interrupted.
Cancelling a washing programme in
progress
Press and hold at the same time, function
buttons (
B
) and (
C
) until all the programme
indicators come on. The appliance is now in
setting mode.
Make sure that there is detergent in
the detergent dispenser before you
start a new washing programme.
End of the washing programme
When the washing programme is completed the
display shows a zero.
Switch off the appliance.
If you do not switch off the appliance,
after three minutes from the end of
the washing programme, all the
indicators go off and the display shows
one horizontal status bar.
This helps to decrease the energy
consumption.
Press any of the buttons (not the on/
off button), the display and the
indicators come on again.
It is recommended that the appliance
is unplugged and the water tap turned
off when the washing programme is
completed.
20 Dishwasher
user
manual
