John Bean EEWH553A Series, Operation Instructions Manual

Page: 17 / 32

- Page 17 -
Operation Instructions
F Press bead-seater pedal on left side of the machine (6
) half way down: air will come out from infl ation hose
end.
G Press bead-seater pedal (6) all the way down swiftly to
get air blast from the infl ator jets in the clamping jaws.
Air simultaneously comes out of infl ator hose.
ATTENTION!
WHEN OPERATING THE BEAD SEATER IT IS MANDA-
TORY TO WEAR SAFETY GLASSES TO PROTECT EYES.
Standard Model with SRA
H
Safety Restraint Arm (7) swings to center of the turntable.
I Lift upward on the restraint positioning knob (8) to posi-
tion over tire/wheel assembly for infl ation, at the same
time push down on the Anti-rotation Lock Arm to release
lock.
(9) You may now swing the safety restraint arm to
position on the center of the wheel. Lower the restraint
until the rubber pad on the restraint disc is resting on
the rim center. The SRA is a gravity lock which will
automatically lock if any force other than the restraint
position knob is lifted. You are now ready for the infl ation
process.
NOTE: the air supply will not function until the safety
arm is centered over the turntable.