Johansson Profino 6610, User Manual, Page: 8 / 84

8
Setting channels / cluster
Each UHF cluster has a bandwidth which can be programmed from 1 to 7 channels.
The VHF cluster has a bandwidth of 1 or 4 channels.
To set the channel(s) per cluster:
In the following example cluster 1 is set for channel 22 to channel 26.
• Turn the button to select the Filter-Input mode.
The LED is green
> Push the rotary button to enter the selected mode.
The LED is now red
> Inside the mode, turn the button to select the cluster to be set.
> Push the button to confirm. LED n°1
The LED is green
• Turn the button to select the Start mode.
The LED is green
> Push the rotary button to enter the selected mode.
The LED is now red
> Inside the mode, turn the button to select the start channel.
Display
> Push the button to confirm.
The LED is green
• Turn the button to select the Stop mode.
The LED is green
> Push the rotary button to enter the selected mode.
The LED is now red
> Inside the mode, turn the button to select the stop channel.
Display
> Push the button to confirm.
The LED is green.
Repeat this section to set all clusters
Filter Input
Filter Input
Filter Input
Start
Start
Start
Stop
Stop
Stop