Johansson Profino 6610, User Manual, Page: 15 / 84

15
COPY FUNCTION
This function allows to transmit all settings from one unit to another unit or import from the memory stick (optional).
Copy from unit to unit.
All actions have to be
done on the SLAVE unit.
The MASTER unit remains
in Stand-by.
SLAVE MASTER
Data
> Connect master and slave unit with a DSUB9 male/male crossed cable.
> Then connect mains to the units.
The software version is displayed,
followed by a dot.
> Push the rotary button for more than 3 seconds to enter into programming mode (see page 5).
> Turn the button to select the Data mode.
The LED is green.
> Push the rotary button for more than 3 seconds to enter the selected mode.
The LED is now red.
“AL “is displayed.
> Push the rotary button to confirm Data Import.
A dot is displayed.
Note:
If a problem occurs during data transmission the display will show an error message:
Possible causes are: wrong type of cable, no cable, bad pin contacts.
3 s.
Data
Data
3 s.
profino
MULTI CHANNEL
PROGRAMMABLE FILTER-AMPLIFIER
q q q q
UHF 1 UHF 2 B III/DAB B I-FM
q
OUTPUT
TEST
(-30dB) DATA
Ref.: 6610
GND : 12-24 VDC
johansson
®
230V~ 50Hz / 20 V
A
profino
MULTI CHANNEL
PROGRAMMABLE FILTER-AMPLIFIER
q q q q
UHF 1 UHF 2 B III/DAB B I-FM
q
OUTPUT
TEST
(-30dB) DATA
Ref.: 6610
GND : 12-24 VDC
johansson
®
230V~ 50Hz / 20 V
A