5
OPERATION
All parameters are set with the rotary push button.
Each function and parameters are shown on 2 digits display and different LED’s .
Programming
Enter programming mode
>
Make all the necessary connections and connect amplifier to mains.
The
software
version
is
displayed,
followed
by
a
dot.
>
Push on the rotary button for more than 3 seconds to enter into programming mode.
A T T E N T I O N !
When security code is activated
(see “Exit programming mode” on page 6):
is
displayed.
>
Turn the button to display “50”
>
Push the button to confirm the code.
Note:
the security code “50” is fixed and can not be changed.
3 s.