Johannus LiVE III AGO, User Manual

Page: 28 / 52

User Manual LiVE III AGO 29
Step 0 of the crescendo pedal cannot be changed.
3. Use the – and + pistons to select the function
Upload Organ
on the
display.
4. Press the ENTER-piston. Five options appear on the display. The pointer
indicates the current choice. These five numbers correspond with the ORGAN
1 till ORGAN 5-pistons.
5. Use the – and + pistons to select the desired memory slot location:
-
Select the option
Empty
if you desire to copy the sample set to an
empty location.
- Select an option where a sample set has already been stored, if you would
like to overwrite this with a new sample set. – The existing intonation data
will be lost, insofar as it deviates from the factory settings. To secure this
intonation data, see § 5.5.4 “Intonation”.
6. Press the ENTER-piston to confirm. A message will appear on the screen that
an USB stick is being searched. Please wait.
7. A message appears on the display that the sample set is being uploaded. This
can take 15-20 minutes. Do not turn off the organ in the meanwhile.
8. As soon as the upload is 100% , you will automatically return to the main
screen. You can play the new sample set of the pipe organ directly.
Organ Settings
With the Organ Settings menu you can change the settings per sample set, in
memory banks, with pistons “ORGAN 1 – 5”. The Organ Settings menu consists of
the following sub-functions:

Crescendo § 5.5.1

Datadump § 5.5.2

Expession Pedals § 5.5.3

Intonation § 5.5.4

Key Volumes § 5.5.5

MIDI Config § 5.5.6

Reset § 5.5.7

Sample Set Version § 5.5.8
5.5.1 Crescendo
The crescendo pedal contains 20 pre-programmed registrations. These
registrations start with very quiet (pianissimo) to very loud (tutti). These pre-
programmed registrations can be changed.
1.
Press the MENU-piston.
2. Use the - and + pistons to select the
Organ Settings
function on the
display.
3. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
4. Use the - and + pistons to select the
Crescendo
function on the display.
5. Press the ENTER-piston. The first step of the crescendo pedal appears on the
display.
6. Use the - and + pistons to select the step which has to be changed.